CSV Sampling Series / Bleed
Clean Sampling Valves
The clean sampling valve series offers a maintenance-free sampling valve, as no diaphragm changeout is necessary – even after CIP / SIP
Key Features
Available in line sizes up to 1” (inlet) / ½” (outlet sampling connection)
No diaphragm changeout – maintenance free
Pneumatic or manual interchangeability
Up to 150C and 25bar operation condition
Typical Applications
In-line sampling, bioreactor sampling, hold tank sampling, WFI sampling, high pressure sampling, automated sampling system, maintenance-free sampling system.
Key Specifications
| Materials of Construction | Cleanliness | Specifications | Options |
|---|---|---|---|
| 316L stainless body |
Manufactured in Class 10 Cleanroom |
Leak tested using Mass spectrometer <1x10(-9) mbar.l/s |
Manual or pneumatic, LOTO failsafe configurations |
| Elgiloy Diaphragm |
Zero particles @0.1µm |
<10Ra micro-inch surface roughness |
PFA / PI seat high temperature (up to 150C) |
| Barstock-only source |
<10ppb O2/H20 outgassing |
Vacuum and pressure tested 100% production control |
4/20mA switching / signalling automation |
| PCTFE standard seat vespel on request |
Cleaned using 18.2MΩ·cm DI water |
375p.s.i. operating pressure |
2.5 - 9.0 Cv (flow coefficient) |